Merge the Linux install pages into one

next.config.mjs

@@ -19,6 +19,66 @@ export default withNextra({
   reactStrictMode: true,
   async redirects() {
     return [
+      {
+        source: '/getting-started/install-memgraph/debian',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/debian.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/ubuntu',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/ubuntu.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/centos',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/centos.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/fedora',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/fedora.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/rocky',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/rocky.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/redhat',
+        destination: '/getting-started/install-memgraph/linux',
+        permanent: true
+      },
+      {
+        source: '/getting-started/install-memgraph/redhat.md',
+        destination: '/getting-started/install-memgraph/linux.md',
+        permanent: true
+      },
       {
         source: '/ai-ecosystem/mcp',
         destination: '/ai-ecosystem/integrations/mcp',
@@ -1236,7 +1296,7 @@ export default withNextra({
       },
       {
         source: '/memgraph/install-memgraph-on-debian',
-        destination: '/getting-started/install-memgraph/debian',
+        destination: '/getting-started/install-memgraph/linux',
         permanent: true
       },
       {
@@ -1286,7 +1346,7 @@ export default withNextra({
       },
       {
         source: '/memgraph/linux-installation-troubleshooting',
-        destination: '/getting-started/install-memgraph/ubuntu',
+        destination: '/getting-started/install-memgraph/linux#troubleshooting',
         permanent: true
       },
       {
@@ -1336,7 +1396,7 @@ export default withNextra({
       },
       {
         source: '/memgraph/install-memgraph-on-ubuntu',
-        destination: '/getting-started/install-memgraph/ubuntu',
+        destination: '/getting-started/install-memgraph/linux',
         permanent: true
       },
       {
@@ -2409,7 +2469,7 @@ export default withNextra({
       },
       {
         source: '/memgraph/getting-started/installation/debian-installation',
-        destination: '/getting-started/install-memgraph/debian',
+        destination: '/getting-started/install-memgraph/linux',
         permanent: true
       },
       {

pages/advanced-algorithms/install-mage.mdx

@@ -66,9 +66,8 @@ are untested.
 {<h3 id="install-memgraph" className="custom-header">Install Memgraph</h3>}
 
 Install the Memgraph package first — the `memgraph-mage` package depends on a
-matching `memgraph` package of the same version. Follow the
-[Ubuntu](/getting-started/install-memgraph/ubuntu) or
-[CentOS](/getting-started/install-memgraph/centos) installation guide.
+matching `memgraph` package of the same version. Follow [Install Memgraph on
+Linux](/getting-started/install-memgraph/linux).
 
 {<h3 id="download-the-mage-package" className="custom-header">Download the MAGE package</h3>}
 

pages/custom-query-modules/cpp/cpp-example.mdx

@@ -26,7 +26,7 @@ First, you need to run the Memgraph instance. You can do this by running the fol
 docker run -p 7687:7687 -p 7444:7444 --name memgraph memgraph/memgraph-mage
 ```
 Keep in mind that you can use the Docker image with just Memgraph or with Memgraph and MAGE. It won't change the way you develop your C++ query module. 
-If you want to run Memgraph on a native Linux machine, follow these [installation steps](/getting-started/install-memgraph/ubuntu) 
+If you want to run Memgraph on a native Linux machine, follow these [installation steps](/getting-started/install-memgraph/linux) 
 
 ### Enter into memgraph container shell
 

pages/deployment/environments/aws.mdx

@@ -168,15 +168,9 @@ to follow the steps below:
 
     <Tabs.Tab>
 
-    Depending on the Linux distribution you are using, you can follow the guide for
-    installing Memgraph on each distribution: 
-
-        - [Ubuntu](/getting-started/install-memgraph/ubuntu)
-        - [Fedora](/getting-started/install-memgraph/fedora)
-        - [Debian](/getting-started/install-memgraph/debian)
-        - [Centos](/getting-started/install-memgraph/centos)
-        - [Red Hat](/getting-started/install-memgraph/redhat)
-        - [Rocky](/getting-started/install-memgraph/rocky)
+    Follow [Install Memgraph on Linux](/getting-started/install-memgraph/linux),
+    which covers DEB- and RPM-based distributions, such as Debian, Ubuntu,
+    CentOS, Fedora, Rocky Linux and Red Hat.
 
     </Tabs.Tab> 
  </Tabs>

pages/deployment/environments/azure.mdx

@@ -166,15 +166,9 @@ to follow the steps below:
 
  <Tabs.Tab>
 
- Depending on the Linux distribution you are using, you can follow the guide for
- installing Memgraph on each distribution: 
-
-    - [Ubuntu](/getting-started/install-memgraph/ubuntu)
-    - [Fedora](/getting-started/install-memgraph/fedora)
-    - [Debian](/getting-started/install-memgraph/debian)
-    - [Centos](/getting-started/install-memgraph/centos)
-    - [Red Hat](/getting-started/install-memgraph/redhat)
-    - [Rocky](/getting-started/install-memgraph/rocky)
+ Follow [Install Memgraph on Linux](/getting-started/install-memgraph/linux),
+ which covers DEB- and RPM-based distributions, such as Debian, Ubuntu,
+    CentOS, Fedora, Rocky Linux and Red Hat.
 
  </Tabs.Tab>
   </Tabs>

pages/deployment/environments/gcp.mdx

@@ -176,15 +176,9 @@ to follow the steps below:
 
  <Tabs.Tab>
 
- Depending on the Linux distribution you are using, you can follow the guide for
- installing Memgraph on each distribution: 
-
-    - [Ubuntu](/getting-started/install-memgraph/ubuntu)
-    - [Fedora](/getting-started/install-memgraph/fedora)
-    - [Debian](/getting-started/install-memgraph/debian)
-    - [Centos](/getting-started/install-memgraph/centos)
-    - [Red Hat](/getting-started/install-memgraph/redhat)
-    - [Rocky](/getting-started/install-memgraph/rocky)
+ Follow [Install Memgraph on Linux](/getting-started/install-memgraph/linux),
+ which covers DEB- and RPM-based distributions, such as Debian, Ubuntu,
+ CentOS, Fedora, Rocky Linux and Red Hat.
 
  </Tabs.Tab> 
 

pages/getting-started/install-memgraph.mdx

@@ -41,11 +41,11 @@ installation options and pick the preferred one.
 
 <Callout type="info">
 As of version 3.13, the native Linux packages are **distro-agnostic**: there is
-a single `.deb` package for all Debian-family distributions (Debian 12+, Ubuntu
-22.04+) and a single `.rpm` package for all RHEL-family distributions
-(RHEL/CentOS/Rocky 9+, Fedora 42+), per architecture. Any Linux with glibc 2.31
-or newer is supported. The per-distribution pages below therefore install the
-same package — they differ only in distribution-specific setup steps.
+a single `.deb` package for all Debian-family distributions and a single
+`.rpm` package for all RHEL-family distributions, per architecture. Any Linux
+with glibc 2.31 or newer is supported. [Install Memgraph on
+Linux](/getting-started/install-memgraph/linux) covers both packages and how to
+check your glibc version.
 
 Memgraph requires **Python 3.10 or newer** on the host (used by Python query
 modules and the auth/SSO modules). Memgraph binds to the host's Python at
@@ -61,24 +61,8 @@ Python already.
     href="/getting-started/install-memgraph/docker"
   />
   <Cards.Card
-    title="Debian"
-    href="/getting-started/install-memgraph/debian"
-  />
-  <Cards.Card
-    title="Ubuntu"
-    href="/getting-started/install-memgraph/ubuntu"
-  />
-  <Cards.Card
-    title="CentOS"
-    href="/getting-started/install-memgraph/centos"
-  />
-  <Cards.Card
-    title="Fedora"
-    href="/getting-started/install-memgraph/fedora"
-  />
-  <Cards.Card
-    title="Red Hat"
-    href="/getting-started/install-memgraph/redhat"
+    title="Linux"
+    href="/getting-started/install-memgraph/linux"
   />
   <Cards.Card
     title="Memgraph Cloud"
@@ -98,11 +82,6 @@ Python already.
     title="WSL"
     href="/getting-started/install-memgraph/wsl"
   />
-  <Cards.Card
-    title="Rocky"
-    href="/getting-started/install-memgraph/rocky"
-
-  />
 </Cards>
 
 

pages/getting-started/install-memgraph/_meta.ts

@@ -1,11 +1,6 @@
 export default {
   "docker": "Docker",
-  "debian": "Debian",
-  "ubuntu": "Ubuntu",
-  "centos": "CentOS",
-  "fedora": "Fedora",
-  "rocky": "Rocky",
-  "redhat": "Red Hat",
+  "linux": "Linux",
   "memgraph-cloud": "Memgraph Cloud",
   "docker-compose": "Docker Compose",
   "kubernetes": "Kubernetes",