diff --git a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx index e41737d506..56f32370b9 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx @@ -4313,6 +4313,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx index 4b2a00a308..c9da532eb8 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx @@ -4313,6 +4313,75 @@ Bei Bedarf können Sie die Profildateien von „{0}“ nach „{1}“ kopieren, Firewall-Regeln + + Alle aktiven Windows-Firewall-Regeln anzeigen (z. B. integrierte Windows-Regeln, von anderen Anwendungen erstellte Regeln oder Regeln aus Gruppenrichtlinien) statt nur der von NETworkManager verwalteten Regeln. Nicht von NETworkManager verwaltete Regeln können aktiviert, deaktiviert, gelöscht oder kopiert, aber nicht bearbeitet werden. Regeln aus einer Richtlinie (z. B. Gruppenrichtlinie oder MDM) können nur kopiert werden. + + + Diese Regel verwendet Werte, die von NETworkManager nicht unterstützt werden (z. B. Port-Schlüsselwörter wie RPC, eine Kombination von Schnittstellentypen, ein Protokoll wie IGMP oder das Programm System). Bearbeiten oder Kopieren der Regel wird (noch) nicht unterstützt, da diese Werte verloren gehen würden und die neue Regel für mehr Datenverkehr gelten könnte (z. B. für alle Ports). + + + Durch Gruppenrichtlinie verwaltet. Die Regel kann lokal nicht geändert, aber kopiert werden. + + + Durch Mobile Device Management (MDM) verwaltet, z. B. Microsoft Intune. Die Regel kann lokal nicht geändert, aber kopiert werden. + + + Zur Laufzeit von Windows erstellt (z. B. dynamische oder fest codierte Regel). Die Regel kann lokal nicht geändert, aber kopiert werden. + + + Mindestens eine der ausgewählten Regeln wird durch eine Richtlinie verwaltet (z. B. Gruppenrichtlinie oder MDM) oder wurde zur Laufzeit von Windows erstellt und kann lokal nicht geändert werden. + + + Eine oder mehrere der ausgewählten Firewall-Regeln sind nicht mehr vorhanden (z. B. in der Verwaltungskonsole der Windows-Firewall gelöscht). Es wurde nichts geändert. + + + Firewall-Regeln werden geladen... + + + Keine Firewall-Regeln gefunden. Verwenden Sie „Regel hinzufügen...“, um eine Regel zu erstellen, oder aktivieren Sie „Alle Regeln anzeigen“ in den Einstellungen, um alle Windows-Firewall-Regeln anzuzeigen. + + + ICMP-Typen + + + Netzwerkadapter + + + Benutzer und Authentifizierung + + + App-Paket + + + Die Regel „{0}“ verwendet die folgenden Eigenschaften, die von NETworkManager nicht unterstützt und nicht kopiert werden: + +{1} + +Die neue Regel kann für mehr Datenverkehr gelten als die ursprüngliche Regel (z. B. für alle Dienste eines Programms statt nur für einen einzelnen). Bitte überprüfen Sie die neue Regel sorgfältig, bevor Sie sie speichern. + + + Alle Regeln anzeigen + + + Von NETworkManager verwaltet. + + + Nicht von NETworkManager verwaltet (z. B. eine integrierte Windows-Regel oder eine von einer anderen Anwendung erstellte Regel). Die Regel kann aktiviert, deaktiviert, gelöscht oder kopiert werden, Bearbeiten wird aber (noch) nicht unterstützt. + + + Regeln aktivieren ({0}) + + + Regeln deaktivieren ({0}) + + + Die folgenden Regeln werden nicht von NETworkManager verwaltet (z. B. integrierte Windows-Regeln oder von anderen Anwendungen erstellte Regeln). Das Ändern dieser Regeln kann die Netzwerkfunktionen von Windows oder anderen Anwendungen beeinträchtigen: + +{0} + + + Das Bearbeiten von Regeln, die nicht von NETworkManager verwaltet werden, wird (noch) nicht unterstützt, da sie Eigenschaften verwenden können, die im Dialog nicht angezeigt werden können (z. B. Regelgruppe, Dienst oder ICMP-Typen). Verwenden Sie „Kopieren als...“, um eine verwaltete Kopie der Regel zu erstellen. + Windows Firewall Einstellungen @@ -4724,20 +4793,20 @@ Cloudflare speichert möglicherweise Ihre IP-Adresse und Netzwerkinformationen. Einträge löschen ({0}) - Copy entry + Eintrag kopieren - Copy rule + Regel kopieren - The selected firewall rules are permanently deleted: + Die ausgewählten Firewall-Regeln werden endgültig gelöscht: {0} - Delete rules + Regeln löschen - Delete rules ({0}) + Regeln löschen ({0}) diff --git a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx index 0b706fc4d8..091b171854 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx @@ -4310,6 +4310,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx index 1e5221cdd2..16b78efea5 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx @@ -4313,6 +4313,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx index 5121423a08..4abd91b25f 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx @@ -4313,6 +4313,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx index 087995b4d3..929737e155 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx @@ -4410,6 +4410,75 @@ All'account deve essere consentito enumerare gli oggetti del computer nella base Regole firewall + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Impostazioni firewall di Windows diff --git a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx index 68a23d2219..6e5736f76e 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx @@ -4313,6 +4313,75 @@ Windows の「設定」>「プライバシーとセキュリティ」>「 ファイアウォールの規則 + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows ファイアウォールの設定 diff --git a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx index aedc5fc1c7..f94398f1f2 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx @@ -4310,6 +4310,75 @@ Windows 설정 > 개인정보 보호 및 보안 > 위치를 열고 데스 방화벽 규칙 + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows 방화벽 설정 diff --git a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx index e31136655f..2ada94f1fc 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx @@ -4313,6 +4313,75 @@ Bei Bedarf kënnt Dir är Profildateie vu "{0}" no "{1}" kopéieren fir är bish Firewall-Reegelen + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows-Firewall-Astellungen diff --git a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx index cb13373812..460a7ff14d 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx @@ -4310,6 +4310,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx index 6d5c518156..6075dc2e2b 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx @@ -4310,6 +4310,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx index 6e39979f5b..e374a5265d 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx @@ -4313,6 +4313,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx index 3c7329e59e..6310450186 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx @@ -4303,6 +4303,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx index 725efcd65e..7bbbdf16a9 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx @@ -4310,6 +4310,75 @@ You can copy your profile files from “{0}” to “{1}” to migrate your exis Firewall rules + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows Firewall settings diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx index 038119bd31..5fab2c96d0 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx @@ -4315,6 +4315,75 @@ URL: http://ip-api.com/ 防火墙规则 + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows 防火墙设置 diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx index e1b4362ae3..42a70bfd67 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx @@ -4313,6 +4313,75 @@ 防火牆規則 + + Show all active Windows Firewall rules (e.g. Windows built-in rules, rules created by other applications or from Group Policy) instead of only the rules managed by NETworkManager. Rules not managed by NETworkManager can be enabled, disabled, deleted or copied, but not edited. Rules from a policy (e.g. Group Policy or MDM) can only be copied. + + + This rule uses values that are not supported by NETworkManager (e.g. port keywords like RPC, a combination of interface types, a protocol like IGMP or the program System). Editing or copying the rule is not supported (yet), because these values would be lost and the new rule could apply to more traffic (e.g. to all ports). + + + Managed by Group Policy. The rule can't be changed locally, but it can be copied. + + + Managed by Mobile Device Management (MDM), e.g. Microsoft Intune. The rule can't be changed locally, but it can be copied. + + + Created by Windows at runtime (e.g. dynamic or hardcoded rule). The rule can't be changed locally, but it can be copied. + + + At least one of the selected rules is managed by a policy (e.g. Group Policy or MDM) or created by Windows at runtime and can't be changed locally. + + + One or more of the selected firewall rules no longer exist (e.g. deleted in the Windows Firewall management console). Nothing was changed. + + + Loading firewall rules... + + + No firewall rules found. Use "Add rule..." to create a rule or enable "Show all rules" in the settings to show all Windows Firewall rules. + + + ICMP types + + + Network adapters + + + Users and authentication + + + App package + + + The rule "{0}" uses the following properties, which are not supported by NETworkManager and are not copied: + +{1} + +The new rule may apply to more traffic than the original rule (e.g. to all services of a program instead of a single one). Please review the new rule carefully before saving it. + + + Show all rules + + + Managed by NETworkManager. + + + Not managed by NETworkManager (e.g. a Windows built-in rule or a rule created by another application). The rule can be enabled, disabled, deleted or copied, but editing is not supported (yet). + + + Enable rules ({0}) + + + Disable rules ({0}) + + + The following rules are not managed by NETworkManager (e.g. Windows built-in rules or rules created by other applications). Changing them may affect the network functionality of Windows or other applications: + +{0} + + + Editing rules that are not managed by NETworkManager is not supported (yet), because they may use properties that can't be shown in the dialog (e.g. rule group, service or ICMP types). Use "Copy as..." to create a managed copy of the rule. + Windows 防火牆設定